|
|
Wings of Horus Paper Warbirds
Home & Education > Hobbies
Caudron G3 1/32 scale DCM
Wings of Horus present the Digital Card Models CAudron G3 in 1/32 scale.
The French-made Caudron G3 used wing-warping rather than ailerons for banking and was a difficult airplane to master as a r ...
more about Caudron G3 1/32 scale DCM >>
Caudron G4 1/32 DCM WW1 Twin engine bomber
Wings of Horus are proud to present you with this fine kit of the Caudron G4, created by Digital Card Models. The French Caudron G4 was developed from the Caudron G3. It had two rotary engines, enabli ...
more about Caudron G4 1/32 DCM WW1 Twin engine bomber >>
DH2, World War 1 Fighter 1/32 Scale Model Kit DCM
The Royal Aircraft Factory designed the DH2 specifically to combat the Fokker Scourge of the early part of the Great War. Designed before the allies managed to capture an aircraft with interupter gear ...
more about DH2, World War 1 Fighter 1/32 Scale Model Kit DCM >>
Nieuport 17 1/32 Scale DCM 40 Squadron
Wings of Horus are proud to present you with this fine kit of the Nieuport 17, created by Digital Card Models. The French Nieuport 17 from was developed from the Nieuport 11 bibi. It was the mount of ...
more about Nieuport 17 1/32 Scale DCM 40 Squadron >>
Nieuport 17 1/32 Scale DCM N124
Wings of Horus are proud to present you with this fine kit of the Nieuport 17, created by Digital Card Models. The French Nieuport 17 from was developed from the Nieuport 11 bibi. It was the mount of ...
more about Nieuport 17 1/32 Scale DCM N124 >>
Nieuport 17 1/32 Scale DCM N3
Wings of Horus are proud to present you with this fine kit of the Nieuport 17, created by Digital Card Models. The French Nieuport 17 from was developed from the Nieuport 11 bibi. It was the mount of ...
more about Nieuport 17 1/32 Scale DCM N3 >>
Nieuport 17 1/32 Scale DCM Royal Naval Air Service
Wings of Horus are proud to present you with this fine kit of the Nieuport 17, created by Digital Card Models. The French Nieuport 17 from was developed from the Nieuport 11 bibi. It was the mount of ...
more about Nieuport 17 1/32 Scale DCM Royal Naval Air Service >>
RAF Be2a 1/32 DCM WW1 Reconnaissance aircraft
Wings of Horus are proud to bring you the Digital Card models Royal Aircraft Factory Be2. The aircraft was extremely stable, which caused problems in combat, making it vulnerable to more maneuverable ...
more about RAF Be2a 1/32 DCM WW1 Reconnaissance aircraft >>
Utilities > Other Softwares
1/72 Scale High resolution Sopwith Camel - Model k
The Sopwith Camel was an aircraft that was as dangerous to rookie pilots as the enemy. In the hands of an experienced flier however it was a lethal weapon. The pilot, guns engines and 80% of the mass ...
more about 1/72 Scale High resolution Sopwith Camel - Model k >>
Modelart 1/32 scale Arava
The Arava was the first transport aircraft that was planned and produced entirely in Israel. The prototype first flew on November 27th 1969. The plane's civilian version was powered by a Pratt & Whitn ...
more about Modelart 1/32 scale Arava >>
Modelart 1/32 scale Avanti
More than just a Business Aircraft.
more about Modelart 1/32 scale Avanti >>
Modelart 1/32 scale Lavochkin La11
Wings of Horus are proud to present the Modelart 1/32 scale Lavochkin La11
more about Modelart 1/32 scale Lavochkin La11 >>
Modelart F15 Strike Eagle
F-15 Eagle was designed in the late 1960s as a FAST maneuverable air superiority fighter to replace the older F-4 Phantom. The first flight of the new fighter was performed on 27/06/1972. During its s ...
more about Modelart F15 Strike Eagle >>
Modelart F15C 1/32 scale model kit
Wings of Horus present
The Modelart F15 in 1/32 scale
more about Modelart F15C 1/32 scale model kit >>
Modelart F15I Eagle
F-15 Eagle was designed in the late 1960s as a FAST maneuverable air superiority fighter to replace the older F-4 Phantom. The first flight of the new fighter was performed on 27/06/1972. During its s ...
more about Modelart F15I Eagle >>
Tummelisa Swedish Home defence fighter (DCM)
Wings of Horus present Digital Card Models' Tummelisa in 1/32 scale.
The first Tummelisas were built in 1919 to replace the aging albatross trainers during the formation of the Flygkompaniet (Swed ...
more about Tummelisa Swedish Home defence fighter (DCM) >>
Utilities > Software Service
1:32 Scale SPAD VII ace Raoul Lufbery DCM
Wings of Horus are proud to present this model of the SPAD VII form Digital Card models.
The Spad VII was first introduced in 1916 as a replacement for the earlier Nieuport . The Spad VII was outc ...
more about 1:32 Scale SPAD VII ace Raoul Lufbery DCM >>
1:32 Scale SPAD VII No1 Flying School DCM
Digital Card Models, and Wings of Horus paper Warbirds present the first in a series of 12 models of this aircraft. DCM 1:32 Scale SPAD VII #1 Flying School
more about 1:32 Scale SPAD VII No1 Flying School DCM >>
1:32 Scale SPAD VII (RFC) Squadron 23 (DCM)
Wings of Horus are proud to present this model of the SPAD VII form Digital Card models.
The Spad VII was first introduced in 1916 as a replacement for the earlier Nieuport . The Spad VII was outc ...
more about 1:32 Scale SPAD VII (RFC) Squadron 23 (DCM) >>
1:32 Scale SPAD VII (Royal Flying Corps)
Wings of Horus are proud to present this model of the SPAD VII form Digital Card models.
The Spad VII was first introduced in 1916 as a replacement for the earlier Nieuport . The Spad VII was outc ...
more about 1:32 Scale SPAD VII (Royal Flying Corps) >>
DCM - exclusive - Albatros DV- Jasta V-Lt Wilhelm
The Albatros series of single-seat fighters produced between 1916 and 1918 were among the most numerous and distinctive aircraft of the First World War.
Approximately 4,800 Albatros fighters of al ...
more about DCM - exclusive - Albatros DV- Jasta V-Lt Wilhelm >>
Hanriot HD1 1/33 scale model kit (Flanders 1917)
The Hanriot HD1 was designed by Henri Dupont in 1916. Designed by the French, flown by the Belgians and built under licence by the Italians, it became the mount of several aces of those nationalities. ...
more about Hanriot HD1 1/33 scale model kit (Flanders 1917) >>
Hanriot HD1 - Swiss Fliegertruppe 1919
The Hanriot HD1 was designed by Henri Dupont in 1916. Designed by the French, flown by the Belgians and built under licence by the Italians, it became the mount of several aces of those nationalities. ...
more about Hanriot HD1 - Swiss Fliegertruppe 1919 >>
Hanriot HD2 floatplane (French Navy)D47 & D33
Developed from the Hanriot HD1, the HD2 floatplane served with the French Aeronavale and US Navy. THe HD2's protected the naval base at Dunkerque from 1917 to 1918.
This version contains parts for ...
more about Hanriot HD2 floatplane (French Navy)D47 & D33 >>
Hanriot HD2 floatplane (US Navy)
Developed from the Hanriot HD1, the HD2 floatplane served with the French Aeronavale and US Navy. THe HD2's protected the naval base at Dunkerque from 1917 to 1918.
This version contains parts for ...
more about Hanriot HD2 floatplane (US Navy) >>
Hanriot HD2 (French 5 colour)
Developed from the Hanriot HD1, the HD2 floatplane served with the French Aeronavale and US Navy. THe HD2's protected the naval base at Dunkerque from 1917 to 1918.
This version contains parts for1 ...
more about Hanriot HD2 (French 5 colour) >>
Ruston Linclon Camel 1/33 scale model kit
A model airplane you can download! The Ruston Linclon Sopwith Camel was the 1000th machine built by the Ruston Proctor aircraft Factory in 1917. The aircraft was painted in a unique scheme and represe ...
more about Ruston Linclon Camel 1/33 scale model kit >>
Siemens Schuckert DIII (Swiss Fliegertruppe)1919
The Siemens Schuckert DIII was one of the best fighter aircraft of the great war. After the Armastice, The Swiss aquired several for home defence.
Features
* Detailed cockpit
* Detailed Sieme ...
more about Siemens Schuckert DIII (Swiss Fliegertruppe)1919 >>
Siemens Schuckert DIV 1/33 scale model Ernst Udet
The Siemens Schuckert DIV was one of the best fighter aircraft of the great war.
Features
* Detailed cockpit
* Detailed Siemens Halske 11 cylinder rotary engine
* Detailed Spandau 7.62mm ...
more about Siemens Schuckert DIV 1/33 scale model Ernst Udet >>
Sopwith Swallow 1/33 scale model kit
The Sopwith Swallow was a prototype aircraft derived from the Sopwith Camel. This aircraft was used by Harry Hawker, then the Sopwith chief test pilot, as a personal runabout.
Features
* Detaile ...
more about Sopwith Swallow 1/33 scale model kit >>
SPAD VII 1/32 scale 10 Squadron DCM
Wings of Horus are proud to present this model of the SPAD VII form Digital Card models.
The Spad VII was first introduced in 1916 as a replacement for the earlier Nieuport . The Spad VII was outc ...
more about SPAD VII 1/32 scale 10 Squadron DCM >>
SPAD VII 1/32 scale - 19_Corps_RAS DCM (scheme 2)
Wings of Horus are proud to present this model of the SPAD VII form Digital Card models.
The Spad VII was first introduced in 1916 as a replacement for the earlier Nieuport . The Spad VII was outc ...
more about SPAD VII 1/32 scale - 19_Corps_RAS DCM (scheme 2) >>
SPAD VII 1/32 scale 19 Corps RAS scheme 1 DCM
Wings of Horus are proud to present this model of the SPAD VII form Digital Card models.
The Spad VII was first introduced in 1916 as a replacement for the earlier Nieuport . The Spad VII was outc ...
more about SPAD VII 1/32 scale 19 Corps RAS scheme 1 DCM >>
SPAD VII 1/32 scale 19 Squadron DCM
Wings of Horus are proud to present this model of the SPAD VII form Digital Card models.
The Spad VII was first introduced in 1916 as a replacement for the earlier Nieuport . The Spad VII was outc ...
more about SPAD VII 1/32 scale 19 Squadron DCM >>
SPAD VII 1/32 scale SPA1471 DCM
Wings of Horus are proud to present this model of the SPAD VII form Digital Card models.
The Spad VII was first introduced in 1916 as a replacement for the earlier Nieuport . The Spad VII was outc ...
more about SPAD VII 1/32 scale SPA1471 DCM >>
SPAD VII 1/32 scale SPA65 DCM
Wings of Horus are proud to present this model of the SPAD VII form Digital Card models.
The Spad VII was first introduced in 1916 as a replacement for the earlier Nieuport . The Spad VII was outc ...
more about SPAD VII 1/32 scale SPA65 DCM >>
SPAD VII 1/32 scale SPA81 DCM
Wings of Horus are proud to present this model of the SPAD VII form Digital Card models.
The Spad VII was first introduced in 1916 as a replacement for the earlier Nieuport . The Spad VII was outc ...
more about SPAD VII 1/32 scale SPA81 DCM >>
SPAD VII 1/32 scale SPA99 DCM
Wings of Horus are proud to present this model of the SPAD VII form Digital Card models.
The Spad VII was first introduced in 1916 as a replacement for the earlier Nieuport . The Spad VII was outc ...
more about SPAD VII 1/32 scale SPA99 DCM >>
|
|
|
